Medium and long chart color screen paperless recorder
Products overview:
ZWQC8000 seriesLong figure color paperless recorderWith 40 analog universal input, 32 road alarm output, the output 100 ma distribution, which can realize signal acquisition, display, processing, recording, integrating, alarm, power distribution, and other functions;Using RS - 232 - c interface or isolated RS - 485 interface, which can realize remote monitoring;Built-in large capacity NAND FLASH as historical data storage media, through the CF card will need to save the data transfer to the computer or other equipment.
Second, the applications:
ZWQC8000 seriesLong figure color paperless recorder is suitable for metallurgy, petroleum, chemical industry, building materials, paper making, food, medicine, heat treatment and water treatment and other industrial field.
Three, the mainFeatures:
System:
1, using large scale integrated circuit, the international plant components design;
2, high-speed, high-performance 32-bit ARM microprocessor, picture response time is less than 0.2 seconds, can achieve 16 road signal detection at the same time, record, display and alarm;
3, 5.6 -inch 320 x234 lattice high brightness color screen graphical LCD display, LED backlight, clear image and wide viewing angles;
4, the whole universal input isolation, there are many kinds of signal input, do not need to jump line, through software configuration;
5, new type of switching power supply, 85 vac ~ 265 vac within the scope of work;
6, integrated hardware real-time clock, useing case the clock will run accurate;
7, provide transmitter + 24 VDC isolation distribution;
8, all aluminum casing and internal shielding plate, guarantee the normal work of the instrument in the bad environment.
9, the large capacity FLASH chip storage of historical data, never lose data when power supply drop;
10, 12 road relay alarm output (VX6116 series support only 8 road relay alarm output)
Signal:
1, can input all kinds of standard signal: standard current, voltage, millivolt, thermocouple, heat resistance, etc.;
2, signal full range accuracy + / - 0.2%;
3, passage between the photoelectric device, completely isolated;
4, provide standard 4-20 ma analog output;
Software:
1, software combination lock to assure the safety of the user configuration;
2, Chinese menu configuration, can free configuration project number, project unit;
3, display of quantities numerical reached four and a half, display range: - 9999 ~ 19999, also support the vacuum operation and scientific notation shows;
4, under the instructions of various channels at the same time limit on ceiling, floor, ceiling, alarm, can record and display the zui nearly 15 alarm information;
5, each channel support flow accumulation function, provide hours report, reported on 8 hours, 12 hours reported on, daily + monthly report and other report forms;
6, as many as four groups of temperature compensation, support the orifice plate, vortex street flow device and steam, water, gas and other medium of compensation calculations;
7, curve display mode choice of horizontal curve and vertical curve;
8, 4 curve group, each group can choose channel, the freedom to choose curve color;
9, built-in GB2312 secondary Chinese character (6500 characters);
10, powerful T6 input method, easy to operate.Support pinyin input Chinese characters, Numbers, English, special symbols, such as the subscript character input, USES the international standard code, solve the problem of special units and a number of Chinese characters input;
Communications:
1, the standard serial communication interface, RS485 and RS232C;
2, support the standard Modbus RTU communication protocol, offers a variety of data types, such as the weight, volume and cumulative amount, etc.In addition to support the company DataManagement data management software, also supports ifixes, kingview, the MCGS, force control, such as general professional configuration software, proprietary drivers;
3, using USB2.0 interface archive and backup history data, zui big support 2 gb usb flash drive;
4, support FAT32 file system, Windows can automatically identify the backup data file, do not need to format conversion;
5, external micro printer, can be manually print data automatic printing real-time data, curves, time, meet the needs of the user site to print.
Four, the technical parameters:
1, the input signal: 40 channel segregation type universal signal input, channel segregation of voltage is greater than 250 vac, channels and isolation between the voltage is greater than 500 vac, channel and channel isolation between pressure greater than 250 vac.
2 and series mode rejection ratio: 60 db (1000:1), common mode rejection ratio: 120 db (1000000:1), 100 Ω source resistance;
3 put reactance, electrostatic interference degree: level 3;Electrical transient bursts immunity: level 3;Surge immunity (impact) : 3 level;
4, the signal type: standard signal (0 ~ 10) mA (4 ~ 20 mA), V (0 ~ 5), V (1 ~ 5), (0 ~ 10) V.
The millivolt signal (0 ~ 20) mV, mV (0 ~ 100);
Thermocouple: B, E, J, K, S, T, WRe5-26, the WRe3-25, R, N, EA - 2;
Thermal resistance signal: Pt100, Cu50, JPT100;V (5 ~ 5), (10 ~ 10) V, V (0 ~ 1), (0.2 ~ 1) V.
5, recording interval: 1 s, 2 s, 4 s, 5 s, 6 s, 8, 10, 12, 15 s s s s, 24 s, 30 s, 36, 48 s s, 1 min, 2 min, 4 min, 5 min, 10 min, 30 min, 1 h, 2 h, 4 h, a total of 22 kinds of recording interval is optional;
6, sampling period: 1 second, which is 1 seconds for each channel sampling 1 times;
7, storage capacity: internal Flash memory zui large capacity is 128 MB;
8, alarm output: 40 road alarm relay output normally open contacts, contact capacity of 3 a / 250 vac (impedance load);
9, real time clock: the hardware real-time clock, after power off by lithium battery, the clock error of plus or minus 1 / month;
10, power-fail protection: all the data stored in NAND FLASH memory, make sure that all the historical data and configuration parameters will not lost by useing;
11, communication interface: provide RS - 485 and RS - 232 - c communication interface for the user to choose from, but can not be used at the same time, the RS - 485 serial bus and host isolation;
12, communication protocol: the R - Bus or ModBus communication protocol, baud rate of communication have 5 kinds of optional, namely 1200 BPS, 9600 BPS, 19200 BPS, 57600 BPS and 115200 BPS.
13, for electricity, communication: (100 ~ 240) VAC: 47 ~ 63 Hz frequency range;
14 and working conditions: temperature (0 ~ 50 ℃);Humidity: (10-85) % (no condensation);Transportation and storage temperature (20 ℃ ~ 60);Humidity: (5 ~ 95) % (no condensation).
Five, the selection table:
Type spectrum | Said Ming | |||||||||
Factory standard ZW | QC8000 | (In the wei and control) | Intelligent forty channel color paperless recorder (640 x 480) | |||||||
Input channel number | 01-40 | Input channel 01 ~ 40 | ||||||||
Alarm points | The output is controlled Can be configured | D00 | No alarm point | |||||||
D01-D16 | Take 1 ~ 16 relay stations | |||||||||
G01-G16 | Take 1 ~ 16 SCR stations | |||||||||
Analog output | A0 | There is no analog output | ||||||||
A1-A4 | Take 1 ~ 4 analog output | |||||||||
The PID output | K0 | No PID output | ||||||||
K1-K4 | Take 1 ~ 4 PID output | |||||||||
Communication interface type | R0 | Without communication | ||||||||
RS232 | With RS232 communication | |||||||||
RS485 | With RS485 communication | |||||||||
Transmitting device Distribution power | P0 | Don't take 24 VDC output | ||||||||
P1-16 | Take 1 ~ 16 and 24 VDC / 25 ma output | |||||||||
Flow accumulation | L0 | No accumulation | ||||||||
L1 | No flow accumulation of temperature, pressure compensation | |||||||||
L2 | With flow accumulation of temperature, pressure compensation | |||||||||
With USB transfer | U0 | No USB storage function | ||||||||
U1 | With the function of USB storage |
After-sales service commitment:
1, our company sold by weiThe paperless recorder seriesProduct quality problem within 12 months, responsible for free maintenance.
2, the warranty period, any quality problems such as the products of our company, my company is responsible for free repair or replacement.
3, the warranty period, such as user improper use, damaged products, my company is responsible for the maintenance, charge damage parts cost.
4, after the warranty period appear quality problem, my company is responsible for the maintenance, charge damage parts cost.
5, such as user need to my company site services, to users in the province I company service personnel to reach the site within 12 hours, fujian association of foreign languages and user reach the site within 48 hours.